Mechanical motion
Motion can be described through position, velocity and the constraints of the mechanism.
Meridian ArchiveAbstract
Motion can be described through position, velocity and the constraints of the mechanism. Friction converts mechanical energy into heat.
Method
- Define
State the reference and the purpose of the comparison. - Observe
Velocity describes change in position over time. - Record
Keep the conditions and observations together. - Review
Separate the result from the assumptions used to interpret it.
Illustrative results
Illustrative reference data, not live measurements.
| Record | Category | Normalized value | Role |
|---|---|---|---|
| R-001 | Geometry | 53 | Reference |
| R-002 | Surface | 30 | Comparison |
| R-003 | Assembly | 42 | Control |
| R-004 | Geometry | 43 | Reference |
| R-005 | Surface | 87 | Comparison |
| R-006 | Assembly | 34 | Control |
Observations
01 / Definition
Velocity describes change in position over time.
02 / Method
Friction converts mechanical energy into heat.
03 / Observation
Clearance and preload describe different assembly conditions.
04 / Interpretation
A reference frame must be defined before comparing motion.
Definitions
- Reference
- A stated basis for comparing observations.
- Resolution
- The smallest change represented by a measuring system.
- Repeatability
- The consistency of observations under the same conditions.
- Boundary
- The conditions and limits chosen for a study.